Square Metal Gate Post
Metal fence posts are made in steel and are designed for the below products, which makes this post suitable for the Hinge and Latch fittings supplied with the Gate.
This particular post is designed for "Concrete In" . There is "NO" pre-dilled holes which allows you to place the gate at which height is convenient when fitting. Comes in either Flat top 1400mm or Ball Top 1450mm, please select from the options above.
These steel posts will arrive Electro Galvanised (Zinc Plated) and Powder Coated in Black which will make them corrosion resistant. Painting them periodically with a good quality gloss paint, such as Hammerite will add to their longevity.
This post is suitable for Gate Ranges:
- Abbey Single Low Bow Top Gates- AB52, AB53
- Court Hoop Top Single Gate - CR05
- Saxon Single Gate - SA05/1-3
- Warwick Low Bow Single Gate - WASB-C
- Sterling Low Bow Single Gate - ST01(ZP), 03(ZP), 05(ZP), 07(ZP)
- Henley Low Bow Top Gate - HESB, HESC
- Classic Low Flat Single Gate - CS2, CS3, CS4, CSZP2, CSZP3, CSZP4
- Classic Low Bow Single Gate - CLB51, CLB52, CLB53
- Regent Low Single Gate - RS2, RS3, RS4, RSZP2, RSZP3, RSZP4
- Manor Single Gate - MA05/1-/3-/5(ZP)
- Weston Single Gate - WESB-C
This post is suitable for Fence Panel Ranges:
- Abbey Fence Pannel - AB01(ZP)
- Saxon Fence Pannel - SA01(ZP)
- Manor Fence Panel - MA01(ZP)
- Court Hoop Top Fence Panel - CR01
If this is not in stock manufacturing may take approx. 14 to 21 working days.
Please note that if you have made to measure gates you may also need made to measure posts which may incur a delivery charge.
- Product CodeBICP-BP50X1400ZP